You’ve just explained how to solve an equation. You ask the class, “Does everyone understand?” Several students nod, two raise their hands, and the rest remain silent.
You decide to move on to the next exercise.
Five minutes later, you discover that much of the class is still making the same mistake.
This situation raises an important question: how can you tell whether students have really understood what you’ve just taught?
The answer isn’t to question students constantly or give them a test after every explanation. It’s to gather small pieces of evidence about their learning, interpret what those responses reveal, and use that information to decide what to do next.
In this guide, you’ll discover seven practical techniques for checking student understanding, examples from different subjects, and a simple way to decide when to move forward, provide additional support, or explain something again.
Why asking “Does everyone understand?” isn’t enough
When teachers ask whether everything is clear, students may answer yes for very different reasons.
Some believe they’ve understood because the explanation sounds familiar. Others haven’t yet recognised exactly what they’re struggling with. Some students simply don’t want to admit their uncertainty in front of their classmates.
Even when a student gives a correct answer, that doesn’t necessarily mean they can apply the idea in a different situation.
Imagine a maths lesson.
The teacher explains:
6 + 3 × 2 = 12
Students follow the calculation and appear to understand.
But when they’re asked to solve 5 + 4 × 3, some answer 27 instead of 17.
The difficulty wasn’t necessarily following the demonstration. It was applying the order of operations independently.
That’s why checking understanding requires more than receiving reassuring answers.
The Education Endowment Foundation highlights the importance of connecting checks for understanding to clear learning objectives, gathering responses from all students, and creating a classroom environment where mistakes can be discussed constructively.
The purpose isn’t to prove that the teacher has explained the material well. It’s to find out what students can actually do with what they’ve learned.
Before checking: define what understanding looks like
The question “Have they understood?” is too broad unless you know what you expect students to demonstrate.
A more useful question is:
“What should students be able to explain, solve, or distinguish after this activity?”
For example:
| Subject | Goal that’s too broad | Observable learning objective | |—|—|—| | Maths | Understand fractions | Identify equivalent fractions and explain why they’re equivalent | | English | Understand subjects | Identify the subject even when it doesn’t appear at the beginning of a sentence | | History | Understand the Industrial Revolution | Distinguish a cause from a consequence in a specific historical context | | Science | Understand photosynthesis | Explain the role of light in photosynthesis | | Foreign languages | Understand the simple past | Choose and use the correct verb form in a new sentence |
The more specific your learning objective, the easier it becomes to choose a meaningful question.
You don’t need to check every aspect of a unit at once.
Identifying one important misconception accurately is often more useful than collecting numerous answers without knowing how to interpret them.
7 techniques for checking student understanding
You can use these techniques individually or combine them.
There’s no need to use all seven in every lesson. Choose the method that best reveals the learning you want to assess.
1. Diagnostic questions: use answers to reveal misconceptions
A diagnostic question is designed to distinguish between different levels or types of understanding.
It’s not enough to include one correct answer. Ideally, the incorrect options should represent common mistakes you want to identify.
Maths example
Question:
What is 8 + 4 × 2?
- A) 24
- B) 16
- C) 20
- D) 12
The correct answer is B) 16.
Option A) 24 may indicate that a student is adding before multiplying.
Option C) 20 may indicate a different incorrect approach worth asking the student to explain.
How to use it
First, give everyone time to think independently. Then ask students to select an option and reveal their answers simultaneously using a response card, mini whiteboard, or suitable digital system.
Look at the distribution of answers before revealing the solution.
If almost everyone makes the same mistake, you may need to revisit the procedure.
If the misconception affects only a few students, you can provide targeted support while the rest of the class moves forward.
Diagnostic questions are particularly useful before introducing new material that depends on previous knowledge.
2. Ask students to explain the process, not just the answer
Students can sometimes reach a correct result without understanding the underlying reasoning.
After receiving a correct answer, ask:
“How do you know?”
In Science, for example, you might ask:
“Why does a plant need light for photosynthesis?”
Don’t settle for responses such as “because it does” or “because we learned that yesterday.”
Ask students to explain the relationship between light and the process.
In History, you might ask:
“Why is this development considered a consequence of the Industrial Revolution rather than a direct cause?”
What to look for
- Does the student use appropriate subject vocabulary?
- Are the ideas connected logically?
- Can the student explain the reasoning in their own words?
- Does the student rely entirely on repeating the teacher’s explanation?
You don’t need a lengthy presentation. A two-sentence justification may provide enough information.
This technique is especially valuable when an assessment requires reasoning, explanation, or application rather than simple recall.
3. Present a new example
After teaching a rule, show students an example they haven’t seen before.
This helps you check whether they can transfer what they’ve learned to a new situation.
English example
After teaching sentence subjects, write:
“In the garden, the roses bloom.”
Ask students to identify the subject.
The correct answer is “the roses.”
If some students choose “the garden,” they may be associating the subject with the first words of the sentence rather than analysing its relationship with the verb.
Then present:
“On the table rest several books.”
The subject is “several books.”
The second sentence helps you check whether the explanation has improved their understanding.
When to use it
Use this technique when you want to know whether students understand a rule, process, or relationship rather than simply remember an example they have already worked through.
The new task doesn’t need to be especially difficult. It should change enough to require independent thinking.
4. Have everyone reveal their answers at the same time
When teachers ask a question to the whole class, the quickest or most confident students are usually the first to respond.
This can give a misleading impression of how well the entire class understands.
A simple alternative is to ask everyone to write down an answer and reveal it simultaneously.
You could use:
- Mini whiteboards.
- A, B, C, and D response cards.
- Small sheets of paper.
- Individual digital responses, when an appropriate tool is available.
Science example
Question:
“Which of these organisms is a producer in a food chain?”
A) Fox
B) Grass
C) Rabbit
D) Eagle
The correct answer is B) Grass.
Ask all students to choose before showing their responses.
You can then see whether there’s a widespread misunderstanding about producers and consumers.
Common mistake: allowing students to see their classmates’ answers before making their own decision.
To avoid this, provide a period of independent thinking and use a shared signal to reveal answers.
5. Ask students to find and correct a mistake
Sometimes showing an incorrect solution reveals more than asking another question from scratch.
Students must recognise the problem, explain why it’s wrong, and propose a correction.
Maths example
Write:
“A student worked out 5 + 2 × 6 and got 42.”
Ask:
- Is the result correct?
- What mistake did the student make?
- What is the correct answer?
The correct answer is 17.
This activity helps you see whether students understand the order of operations and can recognise an incorrect procedure.
English grammar example
Present the sentence:
“She go to school every day.”
Ask students to identify and correct the mistake:
“She goes to school every day.”
This approach also works in History, Science, and other subjects, provided the error is appropriate for the knowledge students have already developed.
Be careful: if the concept is entirely new and students don’t yet have a clear explanation, beginning with incorrect examples may create confusion.
Use this strategy when students already have enough understanding to analyse the mistake.
6. Use an exit ticket after the explanation
An exit ticket is a short response that students submit at the end of an activity or lesson.
It doesn’t need to be a test or receive a grade.
You can use several types of questions.
Retrieval
“Write one important idea from today’s lesson without looking at your notes.”
Application
“Solve this new example using the rule we studied.”
Identifying difficulties
“Which part of today’s learning could you not yet explain without help?”
Justification
“Explain why this answer is correct.”
For example, after a lesson on equivalent fractions, you might ask:
“Write a fraction equivalent to 2/3 and explain how you found it.”
One possible answer is 4/6, obtained by multiplying both the numerator and denominator by 2.
If a student writes a correct fraction but cannot justify it, that may indicate a need for further practice explaining the method.
What to do next
Group the responses according to the difficulties they reveal and use that information to plan your next activity.
If you want a structured way to fit this process into a short period, see our guide on running an effective 10-minute classroom review.
7. Use a short diagnostic assessment before moving on
When you need to check several connected skills, a single question may not provide enough information.
In that situation, try a short diagnostic assessment with three to five questions.
There’s no need to turn it into a lengthy or graded test.
Maths example
Before teaching operations with fractions, check:
- What do the numerator and denominator represent?
- Which of these two fractions are equivalent?
- How can you produce an equivalent fraction?
- What is wrong with this incorrectly constructed equivalence?
These questions help identify different difficulties.
One student may recognise equivalent fractions but struggle to explain the procedure. Another may understand the concept but make a calculation error.
How to interpret the results
Don’t focus only on the total number of correct answers.
Look at which questions students missed and what each question was designed to assess.
If most students demonstrate the essential knowledge, you may be ready to continue.
If there’s a common misconception involving a crucial prerequisite, address it before introducing a more complex task.
If you’d like to organise this check digitally, an educational quiz can help present a small set of diagnostic multiple-choice questions. The educational purpose depends on how you design the questions and use the answers; it doesn’t have to become a formal assessment.
What should you do with the answers: move forward, reinforce, or reteach?
Checking understanding doesn’t end when students submit their answers.
The crucial next step is deciding how to respond to what you’ve observed.
Consider these three situations.
Situation A: most students answer correctly and can explain why
You may be ready to move on to the next activity.
Before doing so, check that students aren’t simply copying answers or repeating a solution they have just seen.
A new application question gives you more meaningful evidence.
Decision: move forward and revisit the content in a later lesson to check retention.
Situation B: a few students have specific difficulties
Most of the class may be ready to continue while a smaller group is struggling with one step of a procedure.
Repeating the entire explanation for everyone may not be the best option.
You could offer a guided example, an additional hint, or a simpler exercise to students who need it.
Decision: provide targeted support and check the difficulty again.
Situation C: a large part of the class makes the same mistake
If many students misunderstand the same essential concept, moving on immediately may not be appropriate.
However, repeating exactly the same explanation may not help.
Try a different representation, a visual example, or a comparison between a correct and an incorrect procedure.
Then ask a new question.
Decision: reteach the concept in a different way and collect fresh evidence before continuing.
These decisions don’t need to follow universal percentage thresholds. The importance of the concept, the nature of the mistake, and the needs of your class all matter.
A five-minute check for understanding
Suppose you’ve just explained the difference between causes and consequences in History.
You could organise a quick check like this:
| Time | Activity | |—|—| | Minute 1 | Present a statement for students to classify | | Minute 2 | Ask everyone to respond independently and simultaneously | | Minute 3 | Request a brief justification | | Minute 4 | Explain the most important misconception observed | | Minute 5 | Present a new example to check whether students can apply the distinction |
If the responses still reveal a widespread misunderstanding, there’s no need to rush through another planned activity.
Use the time needed to strengthen understanding.
This sequence is a practical organisational suggestion, not a formula that guarantees understanding in five minutes.
Common mistakes when checking understanding
Only listening to students who volunteer
Three correct answers may conceal uncertainty elsewhere in the class.
Better approach: collect an answer from everyone before beginning a discussion.
Asking questions that are too easy
Asking students to repeat a definition that’s still written on the board may measure recognition rather than deeper understanding.
Better approach: ask them to apply the idea to a new example.
Confusing speed with mastery
Some students need longer to formulate an answer even when they understand the content.
Better approach: provide independent thinking time before requesting responses.
Correcting answers without exploring the reasoning
Saying “the correct answer is B” may leave the original misconception unchanged.
Better approach: ask why students chose an option and what needs to change in their reasoning.
Turning every check into a grade
If every answer affects students’ marks, some may become reluctant to take risks or acknowledge difficulties.
Better approach: use ungraded formative checks when your purpose is to identify misconceptions and improve learning.
Continuing despite evidence of an important misunderstanding
Collecting evidence and then ignoring it limits the value of the activity.
Better approach: decide in advance how you’ll respond to secure understanding, individual difficulties, or a widespread misconception.
How to prepare a quick check for understanding with Edutiko
Not every understanding check requires technology.
A mini whiteboard or response card may work perfectly well during an explanation.
However, a digital activity can be useful when you want to prepare several questions and reuse them with different classes.
For example, before starting a new maths unit, you could prepare a short diagnostic activity focused on the prior knowledge students will need.
Edutiko offers educational games, including quiz-style activities that can be used to organise multiple-choice practice.
The key is to design useful questions.
Avoid preparing five questions that all measure exactly the same thing. Select essential knowledge and likely misconceptions.
Then use students’ responses to decide what your class needs.
Explore Edutiko’s educational games
The tools can help organise an activity, but they don’t replace the teacher’s interpretation of students’ answers or the decision about what to teach next.
How to check understanding without interrupting the lesson constantly
A common mistake is thinking you need to stop after every sentence to ask whether students understand.
This can fragment an explanation and make it harder to develop a coherent idea.
Instead, identify the key decision points in your lesson:
- After explaining a rule students need for the next exercise.
- Before introducing a concept that depends on prior knowledge.
- After an example where a common mistake is likely.
- Before moving from guided practice to independent work.
At these moments, one carefully designed question may provide enough information to decide what to do.
Not every check needs five minutes. Some can be completed quickly; others deserve a longer discussion.
What matters is having a clear purpose.
How can you tell whether understanding lasts?
Answering correctly immediately after an explanation doesn’t prove that learning will last.
A student may solve an exercise accurately because they’ve just seen the method demonstrated.
For a fuller picture, check the same learning objective again in a later lesson.
For example:
- Today: identify two equivalent fractions.
- Next lesson: explain how to construct an equivalent fraction without notes.
- Later: use fraction equivalence to solve a problem.
You don’t have to repeat exactly the same question.
You can change the context while keeping the learning objective.
When students retrieve and apply knowledge after an interval, you gain different information from what an immediate answer provides.
One successful later response still doesn’t prove permanent mastery, but it can support better-informed teaching decisions.
Frequently asked questions
How can I tell if all my students have understood an explanation?
Ask everyone to respond individually using cards, mini whiteboards, or a short written question. Then check whether they can explain the answer or apply the concept to a new example.
How many questions do I need to check understanding?
It depends on the learning objective. One well-designed diagnostic question can reveal an important misconception. If you need to check several skills, use a short set of questions that assess different aspects.
What should I do if half the class answers incorrectly?
Investigate the mistake. If it involves essential knowledge, provide a different explanation and check again before moving forward. Don’t make the decision based only on the percentage of correct answers.
Do these activities need to be graded?
No. Formative checks can be used without grades to identify difficulties and adapt teaching. Their main purpose is to improve learning rather than assign marks.
What’s the difference between memorising and understanding?
Remembering a definition or rule can be necessary, but understanding also involves connecting, explaining, and applying ideas appropriately. That’s why it’s helpful to combine recall questions with application and justification.
Can I use these techniques in primary and secondary education?
Yes. Adjust the difficulty of the questions, the time available, and how students respond. Drawings and response cards may work well in primary school, while secondary students can provide more detailed explanations.
Before moving on, look for evidence that helps you decide
Knowing whether students understand isn’t about getting the whole class to say yes.
It’s about seeing what students can do with what they’ve learned and recognising which difficulties still need attention.
Start with one specific learning objective. Prepare a question that reveals a possible misconception, gather answers from everyone, and provide a new application task.
With that information, you’ll be better equipped to decide whether to move forward, offer additional support, or explain the concept in a different way.
The best check for understanding isn’t the one that produces the most correct answers. It’s the one that helps you teach the next part of the lesson more effectively.